Please input complete information in the table below to obtain a detailed quotation。
Models on this page
SKD-B110LZS12, SKD-B112LZS12
The series name is B100LZS; the actual listed order models are SKD-B110LZS12 and SKD-B112LZS12. Both are trigger-start Z-style tools, 250 g and 213.6 mm long, with HI 1000 / LO 700 rpm.
Product inquiry
SKD-B100LZS Series | Ultra-Low-Torque Brushless DC Screwdriver (Trigger Start)
cONTACT
KILEWS INTELLIGENT TECHNOLOGY CO., LTD.
Address: No. 241/134, Moo 3, Bo Win, Si Racha, Chon Buri 20230, Thailand
Phone: 081-136-8391
E-mail: kilewsth@gmail.com 电话: 081-136-8391 微信: 13322901202 LINE: kilews
Key Features
Brushless motor reduces brush maintenance.
Compact, lightweight design with low operating noise.
Forward and reverse controls support fastening and quick screw removal.
Suitable for small, precision assemblies such as watches and compact electronics.
Z-style tool layout helps reach fastening points near edges and corners.
Specifications
| Model | Torque (kgf.cm) | Torque (lbf.in) | Torque (N.m) | Repeatable torque accuracy (%) | No-load speed HI (rpm) | No-load speed LO (rpm) | Machine screw diameter (mm) | Tapping screw diameter (mm) | Weight (g) | Length (mm) | Listed power controller | Bit types |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKD-B110LZS12 | 0.1~1.5 | 0.09~1.32 | 0.01~0.147 | ±3% | 1000 | 700 | 1.0~1.7 | 1.0~1.5 | 250 | 213.6 | SKP-12HL | Specially made bit |
| SKD-B112LZS12 | 0.2~2.0 | 0.17~1.7 | 0.02~0.2 | ±3% | 1000 | 700 | 1.0~1.7 | 1.0~1.5 | 250 | 213.6 | SKP-12HL | Specially made bit |
Dimensions
:mm
Reference Torque Curve
Accessories listed by KILEWS headquarters
Headquarters does not list model-specific accessories for this series.
Official downloads
Check the exact model, controller, manual version and local availability with KILEWS Thailand before ordering or installation.
Model selection
The series name is B100LZS; the actual listed order models are SKD-B110LZS12 and SKD-B112LZS12. Both are trigger-start Z-style tools, 250 g and 213.6 mm long, with HI 1000 / LO 700 rpm.
Controllers, bits and accessories
Both models list the SKP-12HL power controller and a specially made screwdriver bit. Do not treat this as a standard A/B/C/D bit specification. Send the screw-head drawing, bit dimensions and access constraints so the Thailand team can confirm the dedicated bit and supplied configuration. Headquarters does not list dedicated accessory models for this series.
Questions before ordering
What is the difference between B110LZS12 and B112LZS12?
B110LZS12 is 0.01–0.147 N.m (0.1–1.5 kgf.cm); B112LZS12 is 0.02–0.2 N.m (0.2–2.0 kgf.cm). Their listed speed, weight and length are the same.
Can I fit an ordinary screwdriver bit?
The source specifies a specially made bit. Confirm the bit drawing and fit for the exact LZS12 tool rather than assuming interchangeability with other KILEWS series.
Is the Z-style tool suitable for any corner?
The layout helps access edge and corner fastening locations. Provide clearance and screw-position drawings, then verify tool and bit reach on the actual assembly. The catalogue does not guarantee every corner geometry.
How do I request the correct configuration?
Provide the full model suffix, quantity, target torque, screw/joint details, controller label and required delivery date. KILEWS Thailand will confirm the configuration, quoted items, price and availability.
