Please input complete information in the table below to obtain a detailed quotation。
Models on this page
SKD-BE203L, SKD-BE203LS5, SKD-BE203LS6, SKD-BE203LS7, SKD-BE207L, SKD-BE210L
This page covers trigger-start L/LS models; SKD-BE210P is included only for push-start comparison. BE203L runs at 1000/700 rpm; LS5 at 500/350, LS6 at 370/260 and LS7 at 230/160. The slower variants retain the BE203 torque range of 0.02–0.34 N.m.
Product inquiry
SKD-BE200L Series | Low-Torque Brushless DC Screwdriver with Integrated Screw Counter (Trigger Start)
cONTACT
KILEWS INTELLIGENT TECHNOLOGY CO., LTD.
Address: No. 241/134, Moo 3, Bo Win, Si Racha, Chon Buri 20230, Thailand
Phone: 081-136-8391
E-mail: kilewsth@gmail.com 电话: 081-136-8391 微信: 13322901202 LINE: kilews
Key Features
Brushless motor and LED screw counter integrated in one screwdriver.
Counter settings can track fastening counts and timing for assembly quality control.
Auto-learning function estimates the time required for one fastening cycle.
OK ALL / OK ONE / N.G open-collector outputs. Confirm wiring and any optional cable before connecting to a PLC.
Settings can alert operators to missed or incomplete fastening; validate detection with the actual screw and workpiece.
Specifications
| Model | Torque (kgf.cm) | Torque (lbf.in) | Torque (N.m) | Repeatable torque accuracy (%) | No-load speed HI (rpm) | No-load speed LO (rpm) | Machine screw diameter (mm) | Tapping screw diameter (mm) | Weight (g) | Length (mm) | Listed power controller | Bit types |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKD-BE203L | 0.2~3.5 | 0.18~3.08 | 0.02~0.34 | ±3% | 1000 | 700 | 1.0~2.3 | 1.0~2.0 | 330 | LC:226 LB:240 | SKP-32BC-60W(N) | B9.5、C |
| SKD-BE203LS5 | 0.2~3.5 | 0.18~3.08 | 0.02~0.34 | ±3% | 500 | 350 | 1.0~2.3 | 1.0~2.0 | 330 | LC:226 LB:240 | SKP-32BC-60W(N) | B9.5、C |
| SKD-BE203LS6 | 0.2~3.5 | 0.18~3.08 | 0.02~0.34 | ±3% | 370 | 260 | 1.0~2.3 | 1.0~2.0 | 330 | LC:226 LB:240 | SKP-32BC-60W(N) | B9.5、C |
| SKD-BE203LS7 | 0.2~3.5 | 0.18~3.08 | 0.02~0.34 | ±3% | 230 | 160 | 1.0~2.3 | 1.0~2.0 | 330 | LC:226 LB:240 | SKP-32BC-60W(N) | B9.5、C |
| SKD-BE207L | 0.5~7 | 0.44~6.16 | 0.05~0.69 | ±3% | 1000 | 700 | 1.4~2.6 | 1.4~2.3 | 330 | LC:226 LB:240 | SKP-32BC-60W(N) | B9.5、C |
| SKD-BE210L | 1~10 | 0.88~8.8 | 0.10~0.98 | ±3% | 1000 | 700 | 1.6~3.0 | 1.6~2.6 | 330 | LC:226 LB:240 | SKP-32BC-60W(N) | B9.5、C |
| SKD-BE210P | 2~10 | 1.76~8.8 | 0.2~0.98 | ±3% | 1000 | 700 | 1.6~3.0 | 1.6~2.6 | 310 | 230 | SKP-32BC-60W(N) | B9.5、C |
Bit Types
Dimensions
Unit
:mm
Reference Torque Curve
Accessories listed by KILEWS headquarters
Official downloads
SKD-BE200 series catalog
SKD-BE200 operating manualSKD-BE200 V4.0 operating manualSKD-BE200 V4.1 operating manualSKD-BE200 V3.C operating manualCheck the exact model, controller, manual version and local availability with KILEWS Thailand before ordering or installation.
Browse Thailand accessories and compatible equipment (65 models)
Model selection
This page covers trigger-start L/LS models; SKD-BE210P is included only for push-start comparison. BE203L runs at 1000/700 rpm; LS5 at 500/350, LS6 at 370/260 and LS7 at 230/160. The slower variants retain the BE203 torque range of 0.02–0.34 N.m.
Controllers, bits and accessories
The Thailand table lists SKP-32BC-60W(N); headquarters lists SKP-32BC-60W. Retain the revision suffix and confirm the actual supplied controller and wiring. Headquarters now specifies bit types B9.5 and C; this replaces the less specific B/C notation on the previous Thailand page. Confirm the exact bit drawing and shank before ordering. Related accessories listed: KC-13C(S), KW-4, KH-5 and KL-600; inclusion must be quoted separately.
Questions before ordering
How do I select the BE203 slow-speed variant?
Choose the required HI/LO pair: L 1000/700, LS5 500/350, LS6 370/260 or LS7 230/160 rpm. All four have the same listed 0.02–0.34 N.m range; validate the selected speed on the actual screw joint.
How do BE207L and BE210L differ?
BE207L is 0.05–0.69 N.m; BE210L is 0.10–0.98 N.m. The comparison push-start BE210P starts at 0.2 N.m and has a different weight/length row. Do not substitute it solely by the shared 210 number.
Can the counter connect to a PLC?
OK ALL / OK ONE / N.G open-collector outputs are listed. Confirm the optional cable, wiring and matching BE200 manual revision before connection. Count/time alerts need application-specific setup and verification.
How do I request the correct configuration?
Provide the full model suffix, quantity, target torque, screw/joint details, controller label and required delivery date. KILEWS Thailand will confirm the configuration, quoted items, price and availability.
