Please input complete information in the table below to obtain a detailed quotation。
Models on this page
SKD-BN512P, SKD-BN512PF, SKD-BN517PF, SKD-BN519P
This page focuses on P/PF push-start models. L/LF trigger-start rows remain for comparison. BN512P/PF are 0.19–1.18 N.m, BN517PF is 0.29–1.67 N.m and BN519P is 0.29–1.86 N.m. The L/LF BN512 comparison models start at 0.15 N.m.
Product inquiry
SKD-BN500P Series | Medium-Torque Brushless DC Screwdriver (Push Start)
cONTACT
KILEWS INTELLIGENT TECHNOLOGY CO., LTD.
Address: No. 241/134, Moo 3, Bo Win, Si Racha, Chon Buri 20230, Thailand
Phone: 081-136-8391
E-mail: kilewsth@gmail.com 电话: 081-136-8391 微信: 13322901202 LINE: kilews
Key Features
Brushless motor reduces brush maintenance.
Compact, lightweight design with low operating noise for assembly stations.
Stable torque output supports precision fastening of small components.
Standard models offer HI/LO speed selection; check the specification table for high-speed model exceptions.
Confirm the screwdriver bit and controller for the chosen model, and validate torque on the actual assembly.
Specifications
| Model | Torque (kgf.cm) | Torque (lbf.in) | Torque (N.m) | Repeatable torque accuracy (%) | No-load speed HI (rpm) | No-load speed LO (rpm) | Machine screw diameter (mm) | Tapping screw diameter (mm) | Weight (g) | Length (mm) | Listed power controller | Bit types |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKD-BN512L | 1.5~12 | 1.33~10.44 | 0.15~1.18 | ±3% | 1000 | 700 | 1.6~3.0 | 1.6~2.6 | 520 | 235 | SKP-32BC-60W(N) | A、B、C、D |
| SKD-BN512P | 2~12 | 1.77~10.56 | 0.19~1.18 | ±3% | 1000 | 700 | 1.6~3.0 | 1.6~2.6 | 520 | 235 | SKP-32BC-60W(N) | A、B、C、D |
| SKD-BN512LF | 1.5~12 | 1.32~10.56 | 0.15~1.18 | ±3% | 2000 | – | 1.6~3.0 | 1.6~2.6 | 520 | 235 | SKP-BE32HL(N) | A、B、C、D |
| SKD-BN512PF | 2~12 | 1.77~10.56 | 0.19~1.18 | ±3% | 2000 | – | 1.6~3.0 | 1.6~2.6 | 520 | 235 | SKP-BE32HL(N) | A、B、C、D |
| SKD-BN517LF | 3~17 | 2.64~14.96 | 0.29~1.67 | ±3% | 2000 | – | 1.6~3.0 | 1.6~2.6 | 520 | 235 | SKP-BE32HL(N) | A、B、C、D |
| SKD-BN517PF | 3~17 | 2.64~14.96 | 0.29~1.67 | ±3% | 2000 | – | 1.6~3.0 | 1.6~2.6 | 520 | 235 | SKP-BE32HL(N) | A、B、C、D |
| SKD-BN519L | 3~19 | 2.57~16.46 | 0.29~1.86 | ±3% | 1000 | 700 | 2.3~3.5 | 2.3~3.0 | 520 | 235 | SKP-32BC-60W(N) | A、B、C、D |
| SKD-BN519P | 3~19 | 2.57~16.46 | 0.29~1.86 | ±3% | 1000 | 700 | 2.3~3.5 | 2.3~3.0 | 520 | 235 | SKP-32BC-60W(N) | A、B、C、D |
Bit Types
Dimensions
:mm
Accessories listed by KILEWS headquarters
Official downloads
Check the exact model, controller, manual version and local availability with KILEWS Thailand before ordering or installation.
Browse Thailand accessories and compatible equipment (65 models)
Model selection
This page focuses on P/PF push-start models. L/LF trigger-start rows remain for comparison. BN512P/PF are 0.19–1.18 N.m, BN517PF is 0.29–1.67 N.m and BN519P is 0.29–1.86 N.m. The L/LF BN512 comparison models start at 0.15 N.m.
Controllers, bits and accessories
BN512P and BN519P list SKP-32BC-60W(N), HI 1000 / LO 700 rpm. BN512PF and BN517PF list SKP-BE32HL(N), 2000 rpm with no LO value listed. The (N) Thailand revision is retained; confirm the supplied controller and connector rather than removing the suffix. Bit types: A, B, C, D. Headquarters lists KC-6C(S), KW-3, KH-4, KL-1200 and PG-10 as related accessories, not standard package contents.
Questions before ordering
Does BN500P include an integrated screw counter?
This BN500P page describes a brushless push-start screwdriver, not the BE series with an integrated LED counter. If counting is required, ask for a confirmed counter/controller configuration.
Can I replace a P tool with PF and keep the controller?
Do not assume this. P rows list SKP-32BC-60W(N); PF rows list SKP-BE32HL(N) and 2000 rpm. Confirm the tool, controller revision, cable and required operating speed as one configuration.
Are the L models the same as P models?
L/LF are trigger-start comparison models; P/PF start by downward pressure. The BN512 torque minimum differs between L/LF and P/PF. Use the full model suffix when requesting a quotation.
How do I request the correct configuration?
Provide the full model suffix, quantity, target torque, screw/joint details, controller label and required delivery date. KILEWS Thailand will confirm the configuration, quoted items, price and availability.
